Next set the new ASA software image to be the boot image using the following command: boot system disk0:/asa842-k8. ASA console: This console allows you to perform advanced commands for diagnostic purposes. Normally we change the values while recovering the password procedure. Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0) Boot microcode : CN1000-MC-BOOT-2. I would then look at the output of the following command. ASA# copy tftp ]!- Command to set an image as bootup or specify the!- ASDM image file. Of course we can erase our startup configuration but there are some other commands to achieve this. bin first since it is first in the order.
Steps: Cisco ASA/ASDM Boot Image Upgrade Using TFTP. Hit enter, the ASA will start uploading the image from the TFTP server which should be in your PC. Cisco asa set boot image In this case the ASA is already running version 1.
